Back to list

1.5OZ WHITE FLAT OVAL HDPE WITH 18-410 NECK FINISH Custom Color Match Possible

O.Berk can mold many of our bottles and jars in a wide variety of stock & custom colors. Minimum order quantities and setup fees can vary – inquire for more information.

Product Notes

Material Properties

HDPE Plastic
High-density polyethylene Plastic Resin
Plastic Resin Temperature Tolerance
Temperature Tolerance
  • 160 F
Plastic Resin Rigidity Property
Plastic Resin Moisture Barrier Property
Moisture Barrier
  • HIGH
Plastic Resin Impact Resistance Property
Impact Resistance
  • HIGH
Plastic Resin Scuff Resistance Property
Scuff Resistance
  • HIGH
Plastic Resin Oxygren Barrier Property
Oxygren Barrier
  • POOR
Plastic Resin Resistance To Cold Property
Resistance To Cold

For more information about plastic resin charactersitics and compatibility, click here to see our latest inforgraphic on all major plastic resin categories. Please remember, data displayed above are general guidelines, each product/package combination is unique and can react slightly differently.



Product Detail

Product Name
Size More InformationStandard capacity of a bottleThe normal volume (usually measured in cc, ml, or ounces) of a bottle. When a bottle is filled to standard capacity, the contents usually fill to the shoulder area.
1.50 OZ
Overflow Capacity More InformationOverflow capacity of a bottleThis is the maximum fill volume of the bottle. Measured to the very top surface of the bottle.
41.40294144 cc
Neck Diameter More InformationThe Neck DiameterThe outside diameter of the thread, commonly referred to as the "T" dimension.
Neck Finish More InformationThe Neck FinishCommonly measured by thread counts, standardized by the manufacturing industry. There are many different types of neck finishes, see below for a quick video on 6 most common styles.
Color More InformationUnless the item is noted as In Stock Locally as a special color, we note the standard manufactured color on this page (typically clear, white, natural, amber). Custom colors are often available as special production runs with varied minimum order quantity requirements. If you need a custom color match, please add the item to your inquiry cart and specify your color in notes when submitting the inquiry.
Item Weight More InformationThe manufactured net weight of the bottle – stated at nominal, without the manufacturing tolerance noted.
7.00 g
Item Height More InformationBottle HeightOverall height of bottle – stated at nominal, without the manufacturing tolerance noted.
Item Length More InformationBottle LengthThe overall length of the bottle - stated at nominal, without the manufacturing tolerance noted.
Item Width / Diameter More InformationBottle Width / DiameterThe overall width of the bottle (or the diameter for round bottles) – stated at nominal, without the manufacturing tolerance noted.
Blow Technology More InformationThe technology used to produce the plastic bottle. Common production technologies include extrusion blow molding, injection blow molding, stretch blow molding (single stage or 2-stage for PET plastic), or injection molding.
PCR Possibility More InformationNotes the manufacturer’s ability to introduce PCR (Post Consumer Regrind resin) into the production of the component. The ability and percentage of PCR are unique to each manufacturer and production platform – note your interest in the notes section when making an inquiry.
Surface Finish
Dip Tube Length More InformationSpecifies the standard length of the Dip Tube, as manufactured. Dip Tubes can be custom cut to your package requirements.
Orifice Size More InformationOrificeSpecify the opening of the dispensing closure where the product can be dispensed from.
Output More InformationSpecifies the volume of product that will be dispensed during each activation of the component.

Packaging Detail

Carton Count
Carton Weight
Carton Dimension (L)
Carton Dimension (W)
Carton Dimension (H)
Carton / Pallet
Pallet Dimension (W)
Pallet Dimension (L)
Pallet Dimension (H)

Printable Specification Sheet

Add to inquiry cart

Special Order
Min. Order Qty.

The Way Availability Works

    In stock locally Immediate - 2 weeks

  • These products are available for immediate delivery. Depending on transit time to final destination


    Production stock 1 - 4 weeks

  • These products are available at our production facility and generally available within 1 - 4 weeks; depending on transit time to final destination.


    Special order 4 - 12 weeks (or more)

  • These products are stock molds that are available to run as a special order – subject to the stated minimum order quantity. These items are generally available within 4 – 12 weeks, depending on the manufacturing schedule.

Inquiry Cart 0

No

Show more

Packaging Crash Course - Bottles 101

Neck. Foot. Heel. Foundation. They’re a few of the many interesting parts of a bottle that are explained in the Bottle Parts 101: Anatomy Of A Bottle video from O.Berk. In less than three minutes, you’ll see every critical part of a bottle... and be able to understand how they contribute to packaging performance. For example, did you know that if you describe the parts of a bottle beginning from the top that you are actually starting at... the finish? With a name like that, you would never think it is the part of the bottle that is completed first.

How To Measure A Bottle Neck Or Cap

The neck of a bottle has many critical and exacting dimensions. And there are many sizes and countless styles of caps to choose from. The secret to a great fit? The "T" dimension!

And that's precisely what we show you in this O.Berk Packaging Crash Course Video: How To Measure A Bottle Neck Or Cap. In less than a minute and a half you'll learn the key to pairing a great looking bottle with a perfectly-fitting cap.